QwatchView

To register the camera only! Smartphone does not need a PC, allows live viewing!

! Please note that this application cannot be used alone!

"QwatchView" allows you to view camera images from the network camera "Qwatch" series manufactured by IO Data Devices on your smartphone.

This is an application that allows you to watch.

==== Main functions of QwatchView ====

▼ From camera registration to live viewing, just read the QR code!

You can register your camera by simply reading the QR code on the easy connection sheet that comes with the product.

It is compatible with the dynamic DNS service "iobb.net" provided by I-O DATA free of charge.

You can check the camera image even from outside.

▼Check images from up to 4 cameras at the same time

After registering the camera, you can monitor it by simply launching the app. Up to 4 devices can be monitored simultaneously.

▼Can operate the camera

If your camera supports pan/tilt, you can change the direction of the camera up/down, left/right,

You can change the direction of the camera to a preset position.

For night vision compatible cameras, you can turn on/off the night vision mode.

▼Output audio from camera

If your camera is equipped with a speaker (or supports external speakers), the call function will

You can transmit what you say into your smartphone to the other side of the camera.

▼Recording/playback to LAN DISK or SD card

Save still images to your smartphone or use the SD card (or microSD card) connected to your camera

You can record to. It is also possible to record to a LAN DISK installed in the same network as the camera.

You can also record plenty of videos.

It also supports playback of recorded data.

▼Limited time QR code convenient for publishing camera footage

You can issue a QR code with viewing restrictions that sets the connection date and time and days of the week.

This is useful if you want to temporarily show the camera image to someone else.

▼Equipped with 3 remote link functions

Equipped with our unique remote link 3 function that makes it easy to connect even in an apartment.

Even if you have multiple routers and are unable to check from outside, you can use a compatible camera to do so from your workplace or travel destination.

You can check the status of your home.

▼ Automatically record camera video when detected by the sensor! "Event recording" function

When the sensor installed in the camera detects changes in movement, sound, etc., it automatically records the camera image to the SD card.

It supports the "event recording" function. You can also set it to record from a few seconds before detection, so you can also record the situation before detection.

You can check.

It also has a function that sends push notifications when motion is detected.

▼Display temperature and humidity graphs

Measures the ambient temperature and humidity of the camera using the sensor registered on the compatible camera and displays it on a graph.

You can check changes in temperature and humidity.

▼You can check your home network environment in advance

Equipped with a "home network checker" function that diagnoses the network environment.

You can check whether the Qwatch series can be used in your home environment before purchasing.

*QR code is a registered trademark of Denso Wave Co., Ltd.

*The operable contents, recordable media, and devices vary depending on the camera.

For details, please refer to our website or the manual of the product you purchased.

==== Compatible devices ====

For details on compatible network cameras, see below.

https://www.iodata.jp/product/lancam/lancam/

*Please use the latest version of the firmware for compatible network cameras.

Compatible OS: Android OS 5.0 or later