cMate-Load Line (Demo)

Wersja demonstracyjna cMate-Load Line. Międzynarodowa konwencja o liniach ładunkowych

Demo Version cMate-Load Line. International Convention on Load Lines

cMate-Load Line.

International Convention on Load Lines.

This application contains:

- Load Lines, 1966 - International Convention on Load Lines, 1966

- Load Lines, 1966/1988 - International Convention on Load Lines, 1966, as Amended by the Protocol of 1988

The International Convention on Load Lines (CLL), was signed in London on 5 April 1966, amended by the 1988 Protocol and further revised in 2003. The convention pertains specifically to a ship's load line (also referred to as the "waterline"), a marking of the highest point on a ship's hull that can safely meet the surface of the water; a ship that is loaded to the point where its load line is underwater and no longer visible has exceeded its draft and is in danger because its capacity has been exceeded.

The 1988 Protocol was adopted to harmonise the survey and certification requirement of the 1966 Convention with those contained in the International Convention for the Safety of Life at Sea (SOLAS) and MARPOL 73/78.

In accordance with the International Convention on Load Lines (CLL 66/88), all assigned load lines must be marked amidships on each side of the ships engaged in international voyages. The determinations of the freeboard of ships are calculated and/or verified by classification societies which issue International Load Line Certificates in accordance with the legislation of participating States.

Language: English