ATEM Tally Light

تطبيق لمراقبة حالة الكاميرا باستخدام جهاز تبديل الكاميرا ATEM

This is an application to view the status of the camera. You can select a camera and monitor its status (offline, preview, program).

The application also allows the operator to monitor the current cameras in preview and in the program.

Testing was carried out only on ATEMmini Pro with ATEM Software Control version 8.5.2, where we can guarantee 100% correct operation. However, many ATEMs have standard communication protocols.

Requirements: Minimum software version 4.2 (firmware 2.12).

App tested with ATEM Software Control 8.5.2.

How to connect your phone or tablet to ATEM:

You need to connect ATEM to your Wi-Fi router using an Ethernet cable. After that, you need to connect to the Wi-Fi router on your device and set the ATEM IP in the app.

It is important that the IP address of your phone (provided by the DHCP server of the router) is on the same subnet. An example for us:

Router IP: 192.168.1.1

DHCP router is enabled and range 192.168.1.30 - 192.168.1.200

ATEM switch IP: 192.168.1.55

Phone IP: 192.168.1.34

This app does not have access to, store or transfer personal information.

The developer of this app is not affiliated with Blackmagic Design. Blackmagic Design is not affiliated with this application and all copyrights and trademarks are owned by Blackmagic Design PTY LTD with all rights.